Inlet And Outlet 90° Automatic Pump Control

EPC-2 110/220V Adjustable Starting Pressure With Large Flow Automatic Pump Pressure Controller

Monro EPC-2 automatic pump controller, a device is pre-set with 25mm BSP male threads on the buttom and side. Installed with a pump controller on the household water pump, it will automatically start and stop to offer a fantastic all-round solution for managing your water supply. 90º pump-pipe connection.

PREV | No next article

+ Contact us

AUTOMATIC PUMP CONTROLLER

EPC-2

Temperature Resistance
Energy Conservation
G1"Connection Thread
Security

EPC-Series AUTOMATIC PUMP CONTROLLER
ESSENTIALLY REPLACES SIX DEVICES

In tradition water pump control system,
making the plumbing in your home less complicated.

Detail Product Structure Analysis

Common Specification

Power frequency: 50/60Hz

Connections: R 1inch

Adjustable pressure range: 1.2 - 3.0bar

Protection rating: IP65

Max working temperature: 55 deg C

Max. power: 1.1kW

Starting pressure setting: 1.2bar, 1.5bar, 2.2bar

Max working pressure: 10bar

Max current: 10A for 1.1kw (1.5HP)

Build In Pressure Gauge

LED Control Panel Indicators

Power: Green LED light

Pump on: Yellow LED light

Failure: Red LED light

Reset button for manual start after water failure

Rugular Program

Forced start 10s

Stop with pressure keeping: Auto-stop after 10s

Drying runner protection: No water, stop after 10s

Specifications And Dimensions

Model: EPC-2

Box size (cm): 15.2×12.8×23.2

Carton size (cm): 53×48×25

QTY/CTN: 12PCS

N.W (kg): 15

G.W (kg): 17

Customization Optional configuration
for EPC-2 model

Rated Voltage: 220-240V, 110-120V, 110-240V(Dual-Voltage)

Adjustable: Yes or No

Smart Program: Yes or No (Details Refer to Below “Smart Program” Introduction, With Smart Program, Named “EPC-2A”)

Three Types Appearances For EPC-2: (a) Type: No Adjustment / (b) & (c) Types: Adjustable 1.2-3.0bar

EPC-Series SUITABLE FOR
ALL KINDS OF PUMPS

Many pumps now come bundled with a pressure controller, and some may even be pre-installed, streamlining the process of getting your pump and pump controller up and running.

Innovate Product SMART PROGRAM


Model	Upgrade version	Regular version
Forced start	3s	10s
Stop with pressure keeping	Auto-stop after 3s	Auto-stop after 10s
Drying runner protection	No water, stop after 15s	No water, stop after 10s
Automatic restart in case of water failure	Self-start 15s/15mins, after 4times cycle change to self-start 15s/1h.
Impeller anti-seize protection	24h no using, auto-run 10s
Pipeline leakage protection	Red light indicate twinkles twice and pauses for 2s (repeat in cycle)
Flow switch jammed protection	Red light indicate twinkles once and pauses for 2s (repeat in cycle)

Quality AUTHORITATIVE INSTITUTIONS
MULTIPLE CERTIFICATIONS

OUR PRODUCTS Related products

EPC-1

Monro EPC-1 model pump controller is the classic and basic type, was loved by user in the ...
EPC-1.1

Monro EPC-1.1 model pump controller is the related model with EPC-1 model, which added the...
EPC-1A

Monro EPC-1A pressure controller is the model EPC-1 with Smart program, all others are the...
EPC-2

Monro EPC-2 automatic pump controller, a device is pre-set with 25mm BSP male threads on t...
EPC-2.1

Monro EPC-2.1 auto pressure control is the related model with EPC-2 model, which added the...
EPC-3

Monro EPC-3 spain design auto on and off press control, an intelligent and economical syst...
EPC-3P

Monro EPC-3P similar structure with EPC-3, but adjustable starting pressure type from 1.5b...
EPC-5

Monro EPC-5 model automatic pump control, a device which assembled on the water pump (reco...
EPC-5.1

Monro EPC-5.1 model pump controller is the related model with EPC-5 model, which added the...
EPC-7

Monro EPC-7 model pressure control is a big power device for automatic control and protect...
EPC-9

Monro EPC-9 model pressure controller, is a big power device for automatic control and pro...
EPC-10

The EPC-10 water pump pressure switch, a brand new design and appearance for mechanical pr...