EPC-5 Horizontal Installation Water Booster Pump Pressure Switch Automatic Pump Control
Home / Product / Automatic Pump Control / Inlet And Outlet 180° Automatic Pump Control / EPC-5 Horizontal Installation Water Booster Pump Pressure Switch Automatic Pump Control
  • EPC-5 Horizontal Installation Water Booster Pump Pressure Switch Automatic Pump Control
  • EPC-5 Horizontal Installation Water Booster Pump Pressure Switch Automatic Pump Control
  • EPC-5 Horizontal Installation Water Booster Pump Pressure Switch Automatic Pump Control
  • EPC-5 Horizontal Installation Water Booster Pump Pressure Switch Automatic Pump Control
  • EPC-5 Horizontal Installation Water Booster Pump Pressure Switch Automatic Pump Control
  • EPC-5 Horizontal Installation Water Booster Pump Pressure Switch Automatic Pump Control
Inlet And Outlet 180° Automatic Pump Control

EPC-5 Horizontal Installation Water Booster Pump Pressure Switch Automatic Pump Control

Monro EPC-5 model automatic pump control, a device which assembled on the water pump (recommended single phase pump up to 1.1kw (1.5HP) with a max current of 10A). The working principle of it adopts dual control of Pressure and flow, auto start and stop based on water demands. 180º pump-pipe connection.

AUTOMATIC PUMP CONTROLLER
EPC-5
Monro EPC-5 model automatic pump control, a device assembled on the water pump (recommended single phase pump up to 1.1kw (1.5HP) with a max current of 10A). The working principle of it adopts dual control of Pressure and flow, auto start and stop based on water demands. 180º pump-pipe connection.
  • Zhejiang Monro M&E Co., Ltd. Temperature Resistance
  • Zhejiang Monro M&E Co., Ltd. Energy Conservation
  • Zhejiang Monro M&E Co., Ltd. G1"Connection Thread
  • Zhejiang Monro M&E Co., Ltd. Security
EPC-Series AUTOMATIC PUMP CONTROLLER
ESSENTIALLY REPLACES SIX DEVICES

In tradition water pump control system,
making the plumbing in your home less complicated.

Zhejiang Monro M&E Co., Ltd.
Detail Product Structure Analysis
Zhejiang Monro M&E Co., Ltd.
Common Specification

Power frequency: 50/60Hz

Starting pressure setting: 1.2bar, 1.5bar, 2.2bar

Adjustable pressure range: 1.2 - 2.5bar

Max working pressure: 10bar

Connections: G 1inch

Protection rating: IP65

Max current: 10A for 1.1kw (1.5HP)

Max working temperature: 55 deg C

Max. power: 1.1W


LED Control Panel Indicators

Power: Green LED light

Pump on: Yellow LED light

Failure: Red LED light

Reset button for manual start after water failure

Rugular Program

Forced start 10s

Stop with pressure keeping: Auto-stop after 10s

Drying runner protection: No water, stop after 10s


Specifications And Dimensions

Model: EPC-5

Box size (cm): 14.5×15.2×18.6

Carton size (cm): 61×47.5×21

QTY/CTN: 12PCS

N.W (kg): 13

G.W (kg): 15.5

Customization Optional configuration
for EPC-5 model

Rated Voltage: 220-240V, 110-120V, 110-240V(dual-voltage)

Adjustable: Yes or No

Smart Program: Yes or No (details refer to below "Smart Program" introduction, With Smart program, named "EPC-5A")

Zhejiang Monro M&E Co., Ltd.
EPC-Series SUITABLE FOR
ALL KINDS OF PUMPS

Many pumps now come bundled with a pressure controller, and some may even be pre-installed, streamlining the process of getting your pump and pump controller up and running.



Zhejiang Monro M&E Co., Ltd.
Innovate Product SMART PROGRAM

Model


Upgrade version


Regular version


Forced start


3s


10s


Stop with pressure keeping


Auto-stop after 3s


Auto-stop after 10s


Drying runner protection


No water, stop after 15s


No water, stop after 10s


Automatic restart in case of water failure


Self-start 15s/15mins, after 4times cycle change to self-start 15s/1h.



Impeller anti-seize protection


24h no using, auto-run 10s



Pipeline leakage protection


Red light indicate twinkles twice and pauses for 2s (repeat in cycle)



Flow switch jammed protection

Red light indicate twinkles once and pauses for 2s (repeat in cycle)

Quality AUTHORITATIVE INSTITUTIONS
MULTIPLE CERTIFICATIONS
Zhejiang Monro M&E Co., Ltd.